Amico Group of Companies

Oil-Sealed Rotary Vane type with air cooled design
Dynamically balanced multi-vane design
Bearings are permanently lubricated and sealed
Pump shall be direct driven
Equipped with a built-in anti-suck back valve mounted at the pump inlet
Means of removal of the vacuum pump for service or replacement without interruption to the system

ASME certified with provisions for isolating the receiver without interruption of the vacuum service
Rated for full vacuum service with a minimum 200 psig design pressure
Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing

Oil-Sealed Rotary Vane vacuum pump with air cooled design
UL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
Ethernet connectivity with embedded web-page for remote monitoring, password protected for remote adjustment of all operating parameters
Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing
System is modular or field separable, allowing for ease of shipment and handling on-site

UL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
Manual reset for all alarms
All control and alarm functions shall remain energized while any pump in the system remains electrically online
Ethernet connectivity with embedded webpage for remote monitoring, password protected for remote adjustment of all operating parameters
Lag pump will start automatically should the lead pump fail to operate

Oil-Sealed Rotary Vane type with air cooled design
Dynamically balanced multi-vane design
Bearings are permanently lubricated and sealed
Pump shall be direct driven
Equipped with a built-in anti-suck back valve mounted at the pump inlet
Means of removal of the vacuum pump for service or replacement without interruption to the system

ASME certified with provisions for isolating the receiver without interruption of the vacuum service
Rated for full vacuum service with a minimum 200 psig design pressure
Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing

Oil-Sealed Rotary Vane vacuum pump with air cooled design
UL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
Ethernet connectivity with embedded web-page for remote monitoring, password protected for remote adjustment of all operating parameters
Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing
System is modular or field separable, allowing for ease of shipment and handling on-site

UL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
Manual reset for all alarms
All control and alarm functions shall remain energized while any pump in the system remains electrically online
Ethernet connectivity with embedded webpage for remote monitoring, password protected for remote adjustment of all operating parameters
Lag pump will start automatically should the lead pump fail to operate

Oil-Sealed Rotary Vane type with air cooled design
Dynamically balanced multi-vane design
Bearings are permanently lubricated and sealed
Pump shall be direct driven
Equipped with a built-in anti-suck back valve mounted at the pump inlet
Means of removal of the vacuum pump for service or replacement without interruption to the system

ASME certified with provisions for isolating the receiver without interruption of the vacuum service
Rated for full vacuum service with a minimum 200 psig design pressure
Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing

NFPA Duplex RVL Modular Stack Mount