Security Recessed Console Box Assembly
The Security Recessed Console Box Assembly includes a lockable front frame intended to be mounted over a Recessed Console Unit (sold separately). The Security Recessed Console Box Assembly is part of the Amico Alert-1 Series
Request Information
Security Recessed Console Box Assembly
Features
Specifications
- Each recessed security console box is supported by a galvanized steel bracket, which shall be attached to the structural wall.
- The fascia front assembly of the console box is made from extruded, clear anodized aluminium. The back box is made from galvanized steel.
- The medical gas piping terminates as blank capped ends 5" (12.7 cm) above the console back box.
- All specified devices are factory installed in the console backbox. The electrical devices are separated, but they are not pre-wired.
- The console box shall be constructed of 16 gauge steel finish. Affixed to the opposing sides of the box will be two adjustable steel brackets for the purpose of mounting to structural support. The steel brackets shall accommodate various finished wall thicknesses of between 3/8" and 1-1/4" (9.5 mm and 31.75 mm) and shall be field adjustable.
- The security door frame assembly shall be constructed of stainless steel and shall be mounted to the wall by standard screws. The door assembly shall be manufactured from stainless steel and attached to the frame with a stainless steel hinge. Access to the console shall be by opening the stainless steel door by means of a lock and key.
General Features
- Removable front fascia for ease of maintenance and installation
- Single cutout dimension for all accessories (outlets and electrical devices) are on a 2.5" (63.5 mm) center
- Security front frame is made out of stainless steel and shall be lockable
- The console is UL Listed to U.S. and Canadian safety standards and complies with NFPA 99.
Specifications
- Each recessed security console box is supported by a galvanized steel bracket, which shall be attached to the structural wall.
- The fascia front assembly of the console box is made from extruded, clear anodized aluminium. The back box is made from galvanized steel.
- The medical gas piping terminates as blank capped ends 5" (12.7 cm) above the console back box.
- All specified devices are factory installed in the console backbox. The electrical devices are separated, but they are not pre-wired.
- The console box shall be constructed of 16 gauge steel finish. Affixed to the opposing sides of the box will be two adjustable steel brackets for the purpose of mounting to structural support. The steel brackets shall accommodate various finished wall thicknesses of between 3/8" and 1-1/4" (9.5 mm and 31.75 mm) and shall be field adjustable.
- The security door frame assembly shall be constructed of stainless steel and shall be mounted to the wall by standard screws. The door assembly shall be manufactured from stainless steel and attached to the frame with a stainless steel hinge. Access to the console shall be by opening the stainless steel door by means of a lock and key.
General Features
- Removable front fascia for ease of maintenance and installation
- Single cutout dimension for all accessories (outlets and electrical devices) are on a 2.5" (63.5 mm) center
- Security front frame is made out of stainless steel and shall be lockable
- The console is UL Listed to U.S. and Canadian safety standards and complies with NFPA 99.
Specifications
- Each recessed security console box is supported by a galvanized steel bracket, which shall be attached to the structural wall.
- The fascia front assembly of the console box is made from extruded, clear anodized aluminium. The back box is made from galvanized steel.
- The medical gas piping terminates as blank capped ends 5" (12.7 cm) above the console back box.
- All specified devices are factory installed in the console backbox. The electrical devices are separated, but they are not pre-wired.
- The console box shall be constructed of 16 gauge steel finish. Affixed to the opposing sides of the box will be two adjustable steel brackets for the purpose of mounting to structural support. The steel brackets shall accommodate various finished wall thicknesses of between 3/8" and 1-1/4" (9.5 mm and 31.75 mm) and shall be field adjustable.
- The security door frame assembly shall be constructed of stainless steel and shall be mounted to the wall by standard screws. The door assembly shall be manufactured from stainless steel and attached to the frame with a stainless steel hinge. Access to the console shall be by opening the stainless steel door by means of a lock and key.
Downloads
Revit File
Related Products
Have a question?
Complete the form below and one of our reps will reach out to you!
Stay up to date with our latest products and events.