Single Valve Alarm Combo Unit
Single Valve Alarm Combo Unit

With this product’s highly innovative 2 in 1 design, we have combined our first-class Area Alarm with our Single Valve Box, acommodating both in one space providing an aesthetically pleasant, affordable package. The ability to install sensors directly inside the Single Valve Box eliminates the need for prolonged, complex maintenance, as well as the search for absent sensors. Amico’s Single Valve Alarm Combination Unit is built to offer users years of proficient service. Previous concerns regarding convenience, space, maintenance and accessibility become uncertainties of the past, with the ground-breaking, Single Valve Alarm Combo Unit.

DOWNLOADS:
BROCHURESPEC SHEETS

Single Valve Alarm Combo Unit Specs

FilenameSizeType
ape_sp_alarm_vlv_combo_unit_single0.66MBPDF
ape_as_sp0.72MBPDF
  • 2 in 1 design combines the Area Alarm and Zone Valve Box, to allow for space restrictions
  • True digital, illuminated LED display is readable even in poor lighting conditions
  • High/low alarm set-points are field adjustable for each gas service
  • Repeat alarm, adjustable from 1 to 60 minutes or off
  • Gas-specific sensor with DISS nut and nipple
  • Alarm buzzer in excess of 90 decibels
  • Each module marked with an approved medical gas identification label
  • Pre-mounted pull-out ring allows for ease of maintenance
  • Individual microprocessor for each display and sensor module digital sensor is mounted locally
  • Dry contacts for remote monitoring of the high and low alarm

1/2” - 1-1/2”  Valve Drawing

2”  Valve Drawing

2-1/2” - 3” Valve Drawing

Model Numbers:

 

AVCLN-XXG



The Letter “L” Defines the Langauge:

U = English (NFPA)

E = English (ISO)

S = Spanish (NFPA)

F = French (CSA/ISO)

 

The “N” Defines the # of Valves:

1 = 1 Valves

 

Replace “XX” with the Valve Size Required:

1/2" = 05

3/4" = 07

1" = 10

1-1/4" = 12

1-1/2" = 15

2" = 20F

2-1/2" = 25

3" = 30

 

The “G” Defines the Gas:

O = Oxygen

A = Medical Air

V = MedVac

2 = Nitrous Oxide

N = Nitrogen

C = Carbon Dioxide

W = WAGD

E = AGSS

I = Instrument Air

 

NOTE:

All valves are full port.

The power supply will require 1 gang per box.

Example: English, 1 valve, 1/2" [1.3 cm] Oxygen will be in a 2 gang box. AVCU1-05O.

 

The 1-1/2" [3.8 cm] valve will have an empty space above the valve.

Example: A box with 1-1/2" [3.8 cm] Medical Vacuum and a power supply, will require a 3 gang box not 2 gang.

The circuit board shall be positioned above the valve. Refer to 1/2" and 1-1/2" [1.3 cm and 3.8 cm] assembly drawing.

 

The 2" [5.1 cm] valve will be assembled in a 6-1/2" [16.5 cm] deep box.

The 2" [5.1 cm] valve shall be positioned on the bottom of the assembly, with the power supply above the valve.

The 2-1/2" [6.4 cm] and 3" [7.6 cm] valve assembly will be assembled in a 15-1/2" [39.4 cm] wide x 6-1/2" [16.5 cm] deep box. With the valve positioned on the bottom and the power supply on top. Refer to the 2-1/2" [6.4 cm] and 3" [7.6 cm] assembly drawing.

Languages

  • English
  • Français