Single Sensor Indicator Panel Combo Unit
Single Sensor Indicator Panel Combo Unit

Each recessed zone indicator panel box shall consist of the following components: A steel box which can house one zone shut-off with tube extensions, an aluminum frame and a pull-out removable window. Gauge options are 100 psi, 300 psi or 30 inHg. The terminal strips are provided with the box. The sensors and DISS fittings are gas specific and provided with the alarm. 

DOWNLOADS:
BROCHURESPEC SHEETS

Single Sensor Indicator Panel Combo Unit Specs

FilenameSizeType
ape_sp_single_snsr_vlv_com_unit_nfpa0.61MBPDF
ape_sp_single_snsr_vlv_com_unit_csa0.61MBPDF
ape_as_sp0.72MBPDF





Model Numbers:

 

ZIL-PX


 

Available Gauges:

V-X-GAUGE-100

V-X-GAUGE-300

V-X-GAUGE-VAC

 

The Letter “L” Defines the Language

U = English (NFPA)

E = English (CSA/ISO)

F = French (CSA/ISO)

S = Spanish (NFPA)

 

Replace “X” with the Size Required:

1/2" = 1

3/4" =2

1" = 3

1-1/4" = 4

1-1/2" = 5

2" = 6

2-1/2" = 7

3" = 8

 

A2X-AVC-ELBOW: 1/8 NPT street elbow, used between sensor DISS fittings and zone shut-off is included, but not attached.

 

NOTE:

The zone shut-offs shall be full port.

The ½" to 2" shut-off shall be assembled in a 3-7/8" deep box.

The 2-½" or 3" shut-off shall be assembled in a 6-½" deep box.

For sizes ½" to 1-½", the shut-off will be installed into a 2 gang box by turning the box upside down. The shut-offs are mounted and the extra holes are then plugged as shown on the ½" to 1-½" assembly drawing on the previous page.

Languages

  • English
  • Français
  • Español