Sapphire Series LT Horizontal Bed Head Trunking Unit with Lights
Sapphire Series LT Horizontal Bed Head Trunking Unit with Lights

Surface Mounted Consoles

DOWNLOADS:
BROCHUREFLYERSPEC SHEETS

Sapphire Series LT Horizontal Bed Head Trunking Unit with Lights Specs

FilenameSizeType
ac_sp_sapphire_lt_1tier0.65MBPDF
ac_sp_sapphire_lt_2tier0.73MBPDF

Product Benefits

  • Any NFPA or HTM outlets can be used
  • High impact resistant end caps made from injection molded fire retardant ABS plastic
  • Removable laminate panels for access to electrical services
  • Accommodates almost any configuration of medical gas outlets, electrical and communication services
  • High powered factory installed lights located at the top and bottom of the unit
  • Three standard colors of hospital grade laminate to choose from
  • Surface mounted outlets allow ease of access for annual maintenance
  • Individual gas outlet connection
  • Individual electrical wiring connection
  • Upgradable to LED lights with a 20 year guarantee
  • Seamless overlapping edges
  • High impact resistant end caps made from injection molded retardant ABS plastic
  • Accommodates almost any configuration of communication services, electrical devices and medical gas outlets
  • Surface mounted outlets allow ease of access for annual maintenance
  • Individual electrical wiring connection
  • High powered factory installed lights located at the top and bottom of the unit (15 or 20 amp, 120 or 277 volt light bulbs)
  • Removable laminate panels for access to electrical services
  • The material for the backing plate is G90 Galvanized Steel (Ga #16)
  • Individual gas outlet connection

Materials and Construction

  • Enclosure shall be constructed of extruded, anodized aluminum alloy sections to provide a modular surface mounted unit.
  • The Sapphire Series LT system can be manufactured in lengths that range from 1,220 mm to 2,440 mm.
  • Fascia panels, top and bottom cover panels shall be removable to provide access for easy installation and maintenance of the services.
  • Laminated Fascia
    Aluminum strips with High pressure laminate (HPL) with three (3) colors to choose from.
  • Covers and End Caps
    Top and bottom cover panels are made of power coated extruded aluminum. End caps are made of injection molded ABS Fire Retardant plastic.
  • Medical Gas Outlets
    Amico Corporation manufactures several compatible connection types for Medical Gas and Vacuum Outlets.
  • Electrical Wiring
    Wire for standard and critical branch power circuits shall be #10 or #12 (as specified) type THHN stranded copper wire, 600 volt, with heat resistant thermoplastic insulation for hot (black) and neutral (white). Grounds shall be #10 type R THHN stranded copper wire (green). All ground conductors shall be factory installed in conduit.
  • Grounding and Bonding
    Each power receptacle shall have a ground conductor connected to a grounding screw. A grounding bus will be installed in each device location.
  • Electrical Receptacles
    Shall be Hospital Grade 15 or 20 amp, 120 or 277 volt, UL listed and marked Hospital Grade. Quantity and type as shown on drawings. Amico shall furnish and install receptacles with wiring required, as shown on submittal shop drawings.
  • Duplex Receptacles
    shall be NEMA style 5-15R or 5-20R, color Ivory for use on normal power circuits, and color Red for use on critical branch power circuits.
  • Simplex Receptacles
    shall be NEMA style 5-15R or 5-20R, color Ivory for use on normal power circuits, and color Red for use on critical branch power circuits.

General Specifications

  • Fully customized to meet your facility’s specific needs
  • Designed in accordance with HTM and/or NFPA design guides for Bed Head units
  • Smooth rounded edges for infection control and durability
  • Powder coated access panels or laminate colors for product longevity and to meet your room décor
  • Medical gas piping use blank 3 1/2" capped ends located on the back of the console unit

Custom Colors

Wild Cherry
Fusion Maple
Antique White

HWXX-09T-X-SGEN

 

The “XX” Defines the Length of the Console:

48 = 1,220 mm*

60 = 1,525 mm

72 = 1,830 mm

84 = 2,140 mm

96 = 2,440 mm

 

* 1,220 mm consoles can only house one (1) light, either on the top of the unit or the bottom.

 

 

The “X” Defines the Amount of Lights:

L = 2 Lights (top and bottom)

S = 1 Light (top or bottom)

0 = No Lights

Languages

  • English
  • Français
  • Español