Pressure Switch with Gauge for Nitrogen/Air and Oxygen Reserve incorporates a single pole double-throw snap-action switching element. The switch may be wired normally...
/lab-pressure-switch-gauge-nitrogenair-and-oxygen-reserve
|
This pressure switch contains a single pole double throw snap-action micro switch. It is prewired with six colour-coded leads. Normally open/closed circuitry is field-...
/lab-pressure-switch-gauge-pressure
|
Vacuum Gauge Assembly for the medical gas alarm system incorporates a single pole double-throw snap-action micro switch. It is prewired with three color coded leads....
/lab-pressure-switch-gauge-vacuum-or-wagd
|
|
The Pressure Gauge Assembly for the medical gas alarm system shall incorporate a U.L. Listed single pole double throw snap-action micro switch. The pressure switch shall...
/lab-pressure-switch-gauge-assembly
|
The Amico PS 250 Series Regulator shall be for a linesupply, of a single stage and medium duty type.
/products/lab-ps-250-high-pressure-regulator
|
The quadruplex modular stacking configuration consists of two compressors mounted on top of one another on both sides of the receiver tank. This modular or field...
/lab-quadruplex-red-modular-stack-mount-nfpa
|
The Amico Regulator Assembly shall provide medical gas delivery pressure control to surgical tools or apparatus.
The regulator body shall be made of zinc die cast. The...
/lab-regulator-assembly
|
All pipe stub extensions shall be supplied with suitable plugs or caps to prevent contamination of the assembly prior to installation.
Each valve shall be supplied with...
/lab-security-zone-valve-box
|
The Sensor Module shall be complete with a five-year warranty.
The Sensor Module shall contain the transducer which is connected, either remotely or locally, to the...
/lab-sensor-module-0
|
||
Valve shall be operated by a lever-type handle requiring only a quarter turn from a fully open
position to a fully closed position.
The valve shall be equipped with...
/lab-single-zone-valve-box
|
All Sleep Lab Panels shall be an Amico Alert series. The rough-in box shall be fabricated from 18 gauge steel with two nominal 3/8” O.D. type “K” copper pipes to...
/lab-sleep-panel
|
Amico’s Header Bars are oxygen cleaned to include brass shut-off valves for high/low and liquid pressure gases. Configurations include Staggered, Straight, L-Shaped, U-...
/lab-standard-header-bars
|
All section shut-off and main line ball valves shall be an Amico Alert-1 Series.
The Valve shall be 3 piece ball-type design with a bronze body and chrome plated brass...
/lab-threaded-ball-valve
|
