Regal Series Recessed Vertical Flatwall
Regal Series Recessed Vertical Flatwall

Vertical Headwalls

Our Regal Series Recessed Vertical Flatwalls feature a modern design and are available in your choice of painted or laminate finish. These vertical headwalls mount flush with the wall and are optimal for areas with limited space.

DOWNLOADS:
BROCHUREMANUALS

Regal Series Recessed Vertical Flatwall Manuals

FilenameSizeType
ac_instal_instr_regal_recessd_flatwall0.83MBPDF
ac_instal_instr_regal_recessd_flatwall_back_to_back0.92MBPDF
SPEC SHEETSDRAWINGS

Regal Series Recessed Vertical Flatwall Drawings

FilenameSizeType
arch_dr_vh_rrf_fw1406-rc-gen-p0.12MBPDF
arch_dr_vh_rrf_fw1906-qb-gen-p0.15MBPDF
arch_dr_vh_rrf_fw2407-dr-gen-p0.14MBPDF

General Features:

  • Vertical headwall units are recessed into the wall to limit equipment overhang
  • Ideal for rooms with limited space
  • Integrated vertical rails for equipment management
  • Vertical headwall units are available studded or non-studded to meet your installation preference
  • Various dimensions available for vertical headwall units to meet your acuity and aesthetic needs
  • Quantities and configuration of medical gas and electrical services can be designed to your specific application
  • Ease of installation with medical gas and electrical services terminated to a single point at or above the ceiling line

Recommended for all acuity levels including:

  • ICU/CCU
  • Emergency Department/Trauma
  • LDR
  • Transitional Step-Down
  • Patient Rooms
  • Special Procedure

Saves Space

  • 14" and 19" (35.56 cm and 48.26 cm) standard units reduce clutter and allow for access to services

Easy to Clean

  • Seamless fascia with no exposed screws/mounting hardware is easier to clean

Flexibility Meets Your Needs

  • Accessory rails can be used for IT, monitor, cord and equipment management to meet current needs and provide seamless upgrades for future technology

Painted or Laminated

  • Laminated version for better coordination with existing décor
  • Painted version available to reduce product lead time and unit cost

Exceeds Guidelines for Sound Transmission

  • 3rd party tested to exceed AIA guidelines on STC ratings

Streamlined Installation

  • Pre-studded with all services running between the studs, further reducing installation time

Back to Back Installation Option

  • Back-to-back installation on 3 5/8" studs saves you time and money on installation cost

Materials and Construction

  • Two integrated accessory rails are clear etched anodized or powder coated aluminum.
  • Fascia is a single piece of laminated or powder coated aluminum.
  • Amico medical gas outlets, DISS or quick connection type, console style.
  • Medical gas distribution shall be supplied by pipe drops to a single point connection above the unit. All Medical Gas Outlets and piping shall be brazed and tested in accordance with NFPA 99c.
  • Wire for standard and critical branch power circuits shall be #10 or #12 type THHN stranded copper wire, 600 volt, with heat resistant thermoplastic insulation.
  • All ground conductors shall be installed in conduit. Each power receptacle shall have a ground conductor connected to a grounding screw. A grounding bus will be installed in each device barrier box, and shall be installed as to ensure grounding for the complete power system.
  • Electrical receptacles shall be Hospital Grade 15 or 20 amp, 120 or 277 volt, UL listed and marked Hospital Grade. Simplex, duplex, and (optional) safety receptacles shall be NEMA style 5-15R or 5-20R. Optional locking receptacles shall be simplex type, 20 amp, 120 or 277 volt, color black, and be HUBBELL lock 23000 HG style, or equivalent.
  • Low voltage data provisions shall be connected to device junction box via conduit. Amico Corporation shall include pull cord extending from service provision to electrical termination point.
  • Switching shall be Industrial Grade 120 or 277 volt, 15 or 20 amps. Switch type options include SPST, 3-Way or Momentary. Low Voltage Switching will be 0-12 volts, 15 amps unless otherwise noted. Amico Corporation shall furnish, preinstall and wire all switches.
  • Optional lighting can be provided by the Amico Skyline Overbed Light.

Additional Specifications

Fascia Colors

Choose from over 2000 colors that are available from major laminate manufacturers
  

Languages

  • English
  • Français