NFPA Quadruplex RVD Modular Stack Mount
NFPA Quadruplex RVD Modular Stack Mount

NFPA Dry Rotary Vane

The quadruplex modular stacking configuration consists of two vacuum pumps mounted on top of one another on both sides of the receiver tank. This modular or field separable design allows for ease of shipment and handling on site.

DOWNLOADS:
BROCHUREFLYERORDERING GUIDEMANUALSSPEC SHEETS

NFPA Quadruplex RVD Modular Stack Mount Specs

FilenameSizeType
as_sp_dry_rotary_vane_vacs0.45MBPDF
as_sp_premium_3_5_control_panel0.2MBPDF
as_sp_premium_5_7_control_panel0.2MBPDF
as_sp_premium_7_5_control_panel0.2MBPDF
DRAWINGS

General Features

  • Vacuum pump operates completely dry with air cooled design
  • Pump is equipped with self-lubricating carbon or graphite vanes with no water requirements
  • UL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
  • Ethernet connectivity with embedded web-page for remote monitoring, password protected for remote adjustment of all operating parameters
  • Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing
  • System is modular or field separable, allowing for ease of shipment and handling on-site

Vacuum System Accessories

  • An inlet air filter (optional)
  • Flexible connectors
  • Isolation valve
  • Check valve
  • High discharge temperature sensor (with visual indicator)

Design Options

  • Please click the pink "manuals" icon above to download our NFPA design guide for air compressors.
  • Please click the purple "ordering guide" icon above to download our sizing guide for Source equipment.

Control Panel

  • UL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
  • Manual reset for all alarms
  • All control and alarm functions shall remain energized while any pump in the system remains electrically online
  • Ethernet connectivity with embedded webpage for remote monitoring, password protected for remote adjustment of all operating parameters
  • Lag pump will start automatically should the lead pump fail to operate

Vacuum Pump

  • Oil-less Rotary Vane type and operates completely dry with air cooled design
  • Equipped with self-lubricating carbon or graphite vanes with no water requirements
  • Permanently lubricated and sealed
  • Equipped with a built-in anti-suck back valve mounted at the pump inlet
  • Direct driven through a shaft coupling by a NEMA C-face, TEFC electric motor
  • Means of removal of the vacuum pump for service or replacement without interruption to the system

Air Receiver

  • ASME certified with provisions for isolating the receiver without interruption of the vacuum service
  • Rated for full vacuum service with a minimum 200 psig design pressure
  • Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing

NFPA Quadruplex RVD Modular Stack Mount Dry Rotary Vane

NFPA Quadruplex RVD Modular Stack Mount Dry Rotary Vane

Languages

  • English
  • Français
  • Español