NFPA Duplex CCD Horizontal Tank Mount
NFPA Duplex CCD Horizontal Tank Mount

NFPA Contact-less Claw

The duplex horizontal tank mount contact-less claw allows footprint reduction and enhances the overall serviceability by means of its compact design. Relative to the space saver configuration, the horizontal tank mount is capable of accommodating larger sized pumps and accessories. Positioned horizontally on top of the receiver tank, this configuration is available for pumps ranging between 3 - 8.7 HP, offering you maximum space efficiency.

DOWNLOADS:
BROCHUREFLYERORDERING GUIDEMANUALS

Manuals

FilenameSizeType
as_om_contactless_claw_vac1.56MBPDF
as_dg_nfpa_vacuum_systems9.87MBPDF
SPEC SHEETS

NFPA Duplex CCD Horizontal Tank Mount Specs

FilenameSizeType
as_sp_contactless_claw_vacs0.46MBPDF
as_sp_ecoplus_control_panel0.21MBPDF
as_sp_premium_3_5_control_panel0.2MBPDF
as_sp_premium_5_7_control_panel0.2MBPDF
as_sp_premium_7_5_control_panel0.2MBPDF
ape_as_sp0.72MBPDF
DRAWINGS

Vacuum System

  • Pumping chamber operates oil-free and vacuum pump is completely air cooled with no water requirements
  • UL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
  • Ethernet connectivity with embedded web-page for remote monitoring, password protected for remote adjustment of all operating parameters
  • Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing

Vacuum System Accessories

  • An inlet air filter (optional)
  • Check valve
  • Flexible connectors
  • Isolation valve
  • High discharge temperature sensor (with visual indicator)
  • Drain valve
  • Numerical temperature display
  • Site glass

Design Options

  • Please click the pink "manuals" icon above to download our NFPA design guide for air compressors.
  • Please click the purple "ordering guide" icon above to download our sizing guide for Source equipment.

Control Panel

  • UL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
  • Manual reset for all alarms
  • All control and alarm functions shall remain energized while any pump in the system remains electrically online
  • Ethernet connectivity with embedded webpage for remote monitoring, password protected for remote adjustment of all operating parameters
  • Lag pump will start automatically should the lead pump fail to operate

Vacuum Pump

  • Continuous duty, high efficiency, oil-less and friction-less compression Contact-Less Claw type
  • Pumping chamber is oil free
  • Pump is air cooled with no water requirements
  • Claws are synchronized by heavy-duty precision timing gears
  • Built-in anti-suck back valve mounted at the pump inlet
  • Means of removal of the vacuum pump for service or replacement without interruption to the service

Air Receiver

  • ASME certified with provisions for isolating the receiver without interruption of the vacuum service
  • Rated for full vacuum service with a minimum 200 psig design pressure
  • Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing

Languages

  • English
  • Español