Lab Ball Valve
Lab Ball Valve
All section shut-off and main line ball valves shall be an Amico Alert-1 Series.

The Valve shall be 3 piece ball-type design with a bronze body and chrome plated brass ball for sizes 1/2” to 2-1/2”, for size 3” and 4” the ball is stainless steel. Seats shall be Teflon (TFE) and seals Viton for 1/2” - 2-1/2” and Teflon (TFE) for 3” and 4” valves. A blow-out proof stem shall be used and the valve shall have a maximum pressure rating of 600 psi [4,137 kPa].

General Features

  • 3 piece design for ease of maintenance
  • Cleaned for medical gas service
  • Blow-out proof stem
  • Available in sizes 1/2" to 3"
  • Full-Port design
  • Available in locking or non-locking

Specifications

  • All section shut-off and main line ball valves shall be an Amico Alert-1 Series
  • The Valve shall be 3 piece ball-type design with a bronze body and chrome plated brass ball for sizes 1/2" to 2-1/2", for size 3" and 4" the ball is stainless steel. Seats shall be Teflon (TFE) and seals Viton for 1/2" - 2-1/2" and Teflon (TFE) for 3" and 4" valves. A blow-out proof stem shall be used and the valve shall have a maximum pressure rating of 600 psi [4,137 kPa].
  • Valves shall be operated by a lever-type handle requiring only a quarter turn from a fully open position to a fully closed position
  • Valves shall be designed in such a manner that it can be "swung-out" during installation so as to prevent damage due to heat transfer during the brazing operation
  • Each valve assembly shall be washed and degreased for medical gas service. The valve shall be supplied in a sealed plastic bag to prevent contamination prior to installation.
  • Amico products comply with NFPA-99

Languages

  • English
  • Français
  • Español