The Remote Alarm Buzzer can be used in the following separate functions: A device sending a dry contact signal. An Amico Alert-2 area or master alarm. An Alert-2 manifold bank switch-over occurs.
The Amico Universal Remote Alarm Buzzer is designed to work in correlation with several alarm panels
The buzzer will provide the user with the ability to receive an audible alarm, and a visual alarm from a remote dry contact signal. If an alarm condition occurs, the “RED” alarm LED shall flash and the audible alarm will sound. Pushing the “ALARM SILENCE” button will cancel the audible alarm, but the unit will remain in the visual alarm condition until the problem is rectified.
The remote alarm buzzer works on a 5Vdc or 12Vdc power source
The M2-REM-UNIV-SUR, if used with an Amico Alert-2 Manifold or Alarm, does not require a power supply if the distance between the Universal Remote Buzzer and the Manifold or Alarm is less than 60 ft. otherwise an external power supply, A2P-POWER-CONV or a 12 volt DC voltage is required.