CSA Triplex CCD Modular Stack Mount
CSA Triplex CCD Modular Stack Mount

CSA Contact-less Claw

The triplex modular stacking configuration consists of three vacuum systems stacked vertically on one side. For certain sizes, stacking two vacuum pumps on one side and situating one vacuum pump on the other side of the receiver tank is also possible. This modular or field separable design allows for ease of shipment and handling on site.

DOWNLOADS:
BROCHUREFLYERSPEC SHEETS

CSA Triplex CCD Modular Stack Mount Specs

FilenameSizeType
as_sp_contactless_claw_vacs0.46MBPDF
as_sp_ecoplus_control_panel0.21MBPDF
as_sp_premium_3_5_control_panel0.2MBPDF
as_sp_premium_5_7_control_panel0.2MBPDF
as_sp_premium_7_5_control_panel0.2MBPDF
DRAWINGS

General Features

  • Pumping chamber operates oil-free and vacuum pump is completely air cooled with no water requirements
  • cUL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
  • Ethernet connectivity with embedded web-page for remote monitoring, password protected for remote adjustment of all operating parameters
  • Inside and outside of the air receiver is composed of galvanized steel
  • System is modular or field separable, allowing for ease of shipment and handling on site

Vacuum System Accessories

  • Bacterial air inlet filter
  • Flexible connectors
  • Isolation valve
  • High discharge temperature sensor (with visual indicator)
  • Drain valve
  • Numerical temperature display
  • Site glass

Design Options

  • Please click the purple "ordering guide" icon above to download our sizing guide for Source equipment.

Control Panel

  • cUL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
  • Manual reset for all alarms
  • All control and alarm functions shall remain energized while any pump in the system remains electrically online
  • Ethernet connectivity with embedded webpage for remote monitoring, password protected for remote adjustment of all operating parameters
  • Lag pump shall be able to start automatically if the lead pump fails to operate

Vacuum Pump

  • Continuous duty, high efficiency, oil-less and frictionless compression contact-less claw type
  • Pumping chamber is oil free
  • Pump is completely air cooled with no water requirements
  • Built-in anti-suck back valve mounted at the pump inlet
  • Direct driven through a shaft coupling by a NEMA C-face, TEFC electric motor

Air Receiver

  • ASME certified with CRN Registration
  • Air receiver shall be rated for a minimum of 1378 kPa design pressure (200 psi)
  • Inside and outside of the receiver consists of galvanized steel
  • Three-valve bypass for service or replacement without interruption to the system

CSA Triplex CCD Modular Stack Mount

CSA Triplex CCD Modular Stack Mount

The triplex modular stacking configuration consists of three vacuum systems stacked vertically on one side. For certain sizes, stacking two vacuum pumps on one side and situating one vacuum pump on the other side of the receiver tank is also possible. This modular or field separable design allows for ease of shipment and handling on site.

Languages

  • English
  • Français
  • Español