CSA Duplex SCD Modular Stack Mount
CSA Duplex SCD Modular Stack Mount

CSA Scroll Compressors

The duplex modular stacking configuration minimizes installation costs and maximizes the availability of floor space. This configuration consists of two compressors stacked on top of one another. This modular or field separable design allows for ease of shipment and handling on site.

DOWNLOADS:
BROCHUREFLYERMANUALSSPEC SHEETS

CSA Duplex SCD Modular Stack Mount Specs

FilenameSizeType
as_sp_dry_scroll_air_compressor0.36MBPDF
as_sp_ecoplus_control_panel0.21MBPDF
as_sp_premium_3_5_control_panel0.2MBPDF
as_sp_premium_5_7_control_panel0.2MBPDF
as_sp_premium_7_5_control_panel0.2MBPDF
DRAWINGS

General Features

  • A-Frame, stackable scroll allowing two pumps to run simultaneously with smaller footprint allowing for compact design
  • cUL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
  • Ethernet connectivity with embedded web-page for remote monitoring, password protected for remote adjustment of all operating parameters
  • Inside and outside of the air receiver is composed of galvanized steel

Compressor Accessories

  • Individual compressor inline intake filter
  • Non-return valve on the outlet
  • Flexible inlet and outlet couplings
  • Inlet and outlet shut-off valves
  • Pressure relief valve
  • Condensate separator and drains
  • Unloader valve

Design Options

  • Please click the purple "ordering guide" icon above to download our sizing guide for Source equipment.

Control Panel

  • cUL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
  • Manual reset for all alarms
  • All control and alarm functions shall remain energized while any pump in the system remains electrically online
  • Ethernet connectivity with embedded webpage for remote monitoring, password protected for remote adjustment of all operating parameters

Air Compressor

  • Belt driven Oil-Less Rotary Scroll, single stage, air-cooled construction with absolutely no oil needed for operation (Available in 120 or 145 psi application)
  • A-Frame, stackable scroll allowing two pumps to run simultaneously with smaller footprint allowing for compact design
  • 3,600 RPM, premium efficiency motor

Air Receiver

  • ASME certified with CRN Registration
  • Air receiver shall be rated for a minimum of 1378 kPa design pressure (200 psi)
  • Inside and outside of the receiver consists of galvanized steel
  • Three-valve bypass for service or replacement without interruption to the system

Dryer/Filter/Regulator System

  • Integral air treatment system with purge saving feature, CAN/CSA Z7396.1-09 compliant assembly featuring dual desiccant air dryers, dual pre-filters, activated carbon filters, pressure regulator valves, dew point monitor, CO monitor and system safety valves
  • Completely pre-piped and pre-wired to single point service connections for easy installation

Each bank consists of four stages:

  • Stage 1: Prime efficiency coalescer with filtered, differential pressure gauge and electric solenoid auto drain valve
  • Stage 2: Heatless desiccant air dryer, equipped with purge control capable of attaining pressure dew point of -40ºC. The dry compressed air is discharged from the “online” tower into the 3rd stage
  • Stage 3: Prime efficiency particulate after filter with differential manual drain along with downstream pressure regulators that will maintain constant discharge pressure of 350 kPa (field adjustable)
  • Stage 4: An activated carbon final filter shall be installed upstream of the line pressure regulators to remove volatile organic compounds and reduce odor levels

CSA Duplex SCD Modular Stack Mount Scroll Compressor

CSA Duplex SCD Modular Stack Mount Scroll Compressor

Languages

  • English
  • Français
  • Español