CSA Duplex RVL Horizontal Tank Mount
CSA Duplex RVL Horizontal Tank Mount

CSA Lubricated Rotary Vane

The duplex horizontal tank mount lubricated rotary vane pumps provide footprint reduction and enhance the overall serviceability by means of a compact design. Relative to the space saver configuration, the horizontal tank mount is capable of accommodating larger sized pumps and accessories. The duplex horizontal tank mount configuration consists of two vacuum pumps mounted on top of the tank. Positioned horizontally on top of the receiver tank, this configuration is available for pumps ranging between 1.5 – 10.1 HP, offering you maximum space efficiency.

General Features

  • Vacuum pump is equipped with self-lubricating carbon or graphite vanes with no water requirements
  • cUL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
  • Ethernet connectivity with embedded web-page for remote monitoring, password protected for remote adjustment of all operating parameters
  • Inside and outside of the air receiver is composed of galvanized steel

Vacuum System Accessories

  • Bacterial inlet air filter
  • Equipped with flexible connectors
  • Isolation valve
  • High discharge temperature sensor (with visual indicator)
  • Oil drain valve
  • Oil sight glass

Design Options

  • Please click the purple "ordering guide" icon above to download our sizing guide for Source equipment.

Control Panel

  • cUL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
  • Manual reset for all alarms
  • All control and alarm functions shall remain energized while any pump in the system remains electrically online
  • Ethernet connectivity with embedded webpage for remote monitoring, password protected for remote adjustment of all operating parameters
  • Lag pump shall be able to start automatically if the lead pump fails to operate

Vacuum Pump

  • Oil-Sealed Rotary Vane type and operates with air-cooled design
  • Built-in anti-suck back valve mounted at the pump inlet
  • Direct driven through a shaft coupling by a NEMA C-face, TEFC electric motor

Air Receiver

  • ASME certified with CRN Registration
  • Air receiver shall be rated for a minimum of 1378 kPa design pressure (200 psi)
  • Inside and outside of the receiver consists of galvanized steel
  • A means of bypassing the tank for service or replacement without interruption to the system

Languages

  • English
  • Français
  • Español