Ceiling Column Motorized Retractable
Ceiling Column Motorized Retractable

Ceiling Columns

Amico Motorized Retractable Ceiling Columns provide gas and electrical power to an operating room in one convenient and centralized location. Retractable ceiling columns increase management of overcrowded areas when supplying medical gas and electrical services. When not in use, the columns can be easily stored by raising the telescopic portion, thus avoiding possible accidental contact with medical personnel.

The aesthetically pleasing stainless steel external panels are designed for easy cleaning. Up to 12 medical gas outlets and 12 receptacles can be used per column.

General Features

  • The column is offered with the optional choice of a single Nitrogen Control Panel or a single panel with manifold or a dual Nitrogen Control Panel.
  • The Motorized Retractable ceiling column provides a modern efficient method of supplying gas and electrical services in surgery or special care areas.
  • For use in anesthetizing locations, the gas outlets are bottom mounted. Units for specialized care areas have side mounted outlets to facilitate the use of secondary equipment.
  • When not in use, it can easily be stored away by raising the telescopic section. This will avoid possible accidental contact with medical personnel.
  • When required, the face of the column can be lowered to facilitate hook-up of services.

Retractable ceiling column diagram

 

NOTE:

  1. All labour and material for installation of Riser to Mounting Structure supplied by others.
  2. General Contractor has final responsibility for the strength and stability of the mounting structure that is supplied by others.
  3. Riser plate to be mounted 4.5” (114.3mm) above finished ceiling.
  4. Mounting of column unit to riser plate by (4) 1/2” threaded rods, provided by Amico.
  5. Space between top of Riser Plate and structural ceiling must be minimum 10”(254mm).
  6. Riser Pipe(s) extend 8” (203.2mm) above riser plate.
  7. Pre-ship of the riser assembly is available upon customer’s request.

 

Ceiling column bottom view diagram

 

NOTE:
Riser plate to be installed in ceiling with appropriate mounting structure and anti-sway support. The methods of support shown are provided for reference only.
 

 

 

Ceiling column bottom view outlet layout

 

Scalable versions of these drawings are available in the downloadable spec sheet.

Model Numbers:

C-COL-ELECH-VVV


The Letters “CH” Define Column Height:​

30 inches [762mm]    = 30
36 inches [914mm]    = 36
42 inches [1067mm]  = 42

Note: The motorized retractable ceiling column is available in the height configurations listed above only.

 

Available Retractions:
30 inches [762mm]     = 14 inches
36 inches [914mm]     = 18 inches
42 inches [1067mm]   = 18 inches
 

The Letters “VVV” Define the Voltage:​

120 = 120V
230 = 230V

 

Optional Gas Control Panels:
(to be ordered separately)
Single Nitrogen Control Panel    C-CONP-S-NIT
 

 

Customer Order Information:
Amico requires a signed, approved copy of all specifications before fabrication can begin.  For further information please ask for our Approval & Installation Booklet (C-ELEC-ENG).

Languages

  • English
  • Français
  • Español